Sale!
Add to wishlist

Fluke 805 FC Vibration Meter Fluke

    Original price was: $ 3.659,26.Current price is: $ 914,82.

    SKU: us_1078990635051 Category:

      The reliable, repeatable, accurate way to check bearings and machine health

      Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration, bearing health and machine health.

      Manage and monitor workflow for better maintenance results

      Using the Fluke Connect Mobile App it’s now easier than ever to manage your vibration screening workflow. Integrated machine profile functionality allows you to setup machine profiles using the app and then push them directly to your 805 FC Vibration Meter. Users can then use the list of machine profiles to create work orders, and develop route based maintenance schedules which can be dynamically sent to technicians in field, helping to ensure the proper focus on critical assets. Once a machine is tested, the 805 FC communicates the results directly to the app and associates them with the proper profile and route. This data can easily be shared between teams, so you can make better maintenance decisions.

      Key features

      • EASY SETUP
        Quickly create asset list and work order on your PC, setup machine profiles using Fluke Connect App on your smart device, push routes to your 805 FC for your technicians in the field.
      • CONSISTENT DATA QUALITY
        Take accurate, reliable measurements at both low and high frequency ranges
      • MOBILE DATA ACCESS
        Store results in the cloud and share data with your team remotely
      • INNOVATIVE SENSOR DESIGN
        Minimize measurement variations caused by device angle or contact pressure

      Specifications
      Low frequency range (overall measurement) 10 Hz to 1,000 Hz
      High frequency range (CF+ measurement) 4,000 Hz to 20,000 Hz
      Severity levels Good, satisfactory, unsatisfactory, unacceptable
      Vibration limit 50 g peak (100 g peak-peak)
      A/D converter 16-bit
      Signal to noise ratio 80 dB
      Sampling rate Low frequency: 20,000 Hz
      High frequency: 80,000 Hz
      Real time clock backup Coin battery
      Sensor
      Sensitivity 100 mV g ± 10%
      Measurement range 0.01 g to 50 g
      Low frequency range (overall measurement) 10 Hz to 1,000 Hz
      High frequency range 4,000 Hz to 20,000 Hz
      Resolution 0.01 g
      Accuracy At 100 Hz ± 5% of measured value
      Amplitude Units
      Acceleration g, m/sec²
      Velocity in/sec, mm/sec
      Displacement mils, mm
      Infrared Thermometer (Temperature Measurement)
      Range -20 °C to 200 °C (-4 °F to 392 °F)
      Accuracy ±2 °C (4 °F)
      Focal length Fixed, at ~3.8 cm (1.5″)
      External Sensor
      Note: Fluke supports but does not provide external sensors
      Frequency range 10 Hz to 1,000 Hz
      Bias voltage (to supply power) 20 V dc to 22 V dc
      Bias current (to supply power) Maximum 5 mA
      Firmware
      External interfaces USB 2.0 (full speed) communication
      Data capacity Database on internal flash memory
      Upgrade Through USB
      Memory Up to 3,500 measurements
      Radiated Emission
      Electrostatic discharge: burst Standard EN 61000-4-2
      Electromagnetic interference Standard EN 61000-4-3
      RE Standard CISPR 11, Class A
      Environmental
      Operating temperature -20 °C to 50 °C (-4 °F to 122 °F)
      Storage temperature -30 °C to 80 °C (-22 °F to 176 °F)
      Operating humidity 10% to 95% RH (non-condensing)
      Operating/storage altitude Sea level to 3,048 meters (10,000 feet)
      IP rating IP54
      Vibration limit 500g peak
      Drop test 1 meter
      General Specifications
      Battery type AA (2) Lithium Iron Disulfide
      Battery life 250 measurements
      Size (L x W x H) 24.1 cm x 7.1 cm x 5.8 cm
      (9.5 in x 2.8 in x 2.3 in)
      Weight 0.40 kg (0.89 lb)
      Connectors USB mini-B 7-pin, external sensor jack (SMB connector)

      Includes:

      • USB cable
      • Storage case
      • Belt holster
      • Quick reference guide
      • Two (2) AA batteries

      Fluke 805 FC Spec Sheet

      Fast Shipping and Professional Packing

      We offer a broad range of shipping options due to our long-running partnerships with UPS, FedEx and DHL. Our warehouse employees will pack all goods to our exacting requirements. Your items are carefully inspected and secured properly prior to shipping. We ship to thousands of customers every day from all over the world. This demonstrates our dedication to becoming the largest online retailer in the world. Warehouses and distribution centres can be located in Europe as well as the USA.

      Note: Orders that contain more than one item will be assigned a processing date depending on the item.


      We will carefully examine all items before sending. Today, the majority of orders will be shipped within 48 hours. The expected delivery time will be between 3 and 7 days.


      Returns


      Stock is dynamic. It's not completely managed by us, since we have multiple entities, including the factory and the storage. The actual inventory can fluctuate at any time. It is possible that the stocks could be depleted after your order has been processed.


      Our policy lasts 30 days. If you haven't received the product within 30 days, we're not able to issue a refund or an exchange.


      To be eligible for a refund the product must be unopened and in the same state as when you received it. The item must be returned in its original packaging.