The LinkIQ Cable+Network Tester is the testing solution to verify cable performance up to 10 Gb/s and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements and provides distance to fault information along with a wire map of the cable under test. The LinkIQ also performs nearest switch diagnostics to identify key network issues and validate switch configuration eliminating the need of using another device. Additional features include Analog and Digital Toning, Port Blink, 802.1x authentication, Remote Office Locators, and the ability to manage results via LinkWare PC.
Overview
The LinkIQ™ is capable of measuring lengths up to 1000 feet (305 m) and provides distance to faults such as opens, shorts, and unterminated cable.
The included MS-IE Remote Adapter allows to identify mis-wired and split pairs on RJ45, M12X, M12D, and M8D terminated cables.
The LinkIQ™ supports EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet and qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s) and also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE testing and load test up to Class 8 (90W).
Includes LinkIQ™ Main Unit, Remote ID #1-7, IntelliTone(TM) Pro 200 Probe, RJ45-RJ45 patch cord (M-F), RJ45-RJ45 patch cord (M-F), Quick Reference Guide,AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 Modular Adapter, Hanging strap with Remote ID holder, and duffle bag carry case.
Specifications
| Active Network Diagnostics | |
| Diagnostic Protocols | Link layer discovery protocol (LLDP) Cisco discovery protocol (CDP) Fast link pulses (FLP) |
| Nearest Device Diagnostics (If available through Diagnostic Protocols) | Switch name Port number VLAN ame Advertised data rates Advertised duplex |
| Power Over Ethernet Compatibility | IEEE 802.3af/at (SW v 1.0) Hardware negotiation with signature resistance Software negotiation with LLDP/CDP |
| Power Over Ethernet Diagnostics | Advertised power class (1 to 4), SW v 1.0 Advertised available power Powered pairs Diagnostics for both single and dual signatures |
| Power Over Ethernet Measurements | Loaded voltage (V), Loaded power (W) |
| Port Blink | Blink the light of the connected port |
| Cable Test Specifications | |
| Test Port | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs |
| Commissioning Autotests | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map only Test Speed: 6 seconds for lengths <229′ (70 m) |
| Cable Types | Balanced twisted-pair cabling Unshielded twisted-pair Screened twisted-pair 2-pair and/or 4-pair |
| Wire Map-Only Tests | Document wire map Length of each pair Diagnose split pairs User selectable T568A or T568B User selectable crossover settings (straight through, half-crossover, full-crossover) Test speed: 1 second for lengths <393′ (120 m) |
| Length (Maximum) | 1000′ (305 m) |
| Nominal Velocity of Propagation (NVP) | User settable |
| Tone Generator | Generates digital tones compatible with Fluke Networks IntelliTone probe Generates analog tones compatible with general analog probes |
| Remote ID Locators | Use remote ID terminations to identify up to 7 unique ports or office outlets |
| General Specifications | |
| Display | 800 x 480 color capacitive multi-touch |
| Temperature | Operating: 32 to 113°F (0 to 45°C) Storage: -4 to 122°F (-20 to 50°C) |
| Operating Relative Humidity | 0 to 90%, 32 to 95°F (0 to 35°C) 0 to 70%, 95 to 113°F (35 to 45°C) |
| Operating Altitude | 13,123′ (4000 m) 10,498′ (3200 m) with AC adapter |
| Vibration | Random, 2 g, 5 to 500 Hz |
| Drop | 39″ (1 m) drop, 6 sides |
| Battery | Type: Lithium-ion, 3.6 V, 6400 mAh Life: 8 hours typical Charge time: 4.5 hours Charging temperature range: 32 to 104°F (0 to 40°C) |
| Power Adapter | Input: 100 to 240 V AC ±10%, 50/60 Hz Output: 15 V DC, 2 A maximum Class II |
| Host Interface | USB type C |
| Dimensions | 8.5 x 4.5″ (21.59 x 11.43 cm) |
| Weight | 1.6 lbs (624 g) |
What’s in the Box
- Fluke Networks LIQ-KIT-IE
- LinkIQ Main Unit
- Remote ID #1-7
- IntelliTone(TM) Pro 200 Probe
- RJ45-RJ45 patch cord (M-F)
- Quick Reference Guide
- AC charger
- RJ45/11 universal coupler
- RJ45/M12X patch cord
- RJ45/M12D patch cord
- RJ45/M8D patch cord
- RJ45/11 Modular Adapter
- Hanging strap with Remote ID holder
- Duffle bag carry case
Fluke Networks LIQ-100-IE
- LinkIQ™ Main Unit
- Remote ID #1
- RJ45-RJ45 patch cord (M-F)
- Quick Reference Guide
- AC charger
- RJ45/11 universal coupler
- RJ45/M12X patch cord
- RJ45/M12D patch cord
- RJ45/M8D patch cord
- RJ45/11 Modular Adapter
- Hanging strap with Remote ID holder
- Duffle bag carry case
Resources
Fluke Networks LIQ-KIT-IE Industrial Ethernet Cable and Network Tester Kit Spec Sheet
| Style | FLU-LIQ-KIT-IE, FLU-LIQ-100-IE |
|---|
Fast Shipping and Professional Packing
We offer a broad range of shipping options due to our long-running partnerships with UPS, FedEx and DHL. Our warehouse employees will pack all goods to our exacting requirements. Your items are carefully inspected and secured properly prior to shipping. We ship to thousands of customers every day from all over the world. This demonstrates our dedication to becoming the largest online retailer in the world. Warehouses and distribution centres can be located in Europe as well as the USA.
Note: Orders that contain more than one item will be assigned a processing date depending on the item.
We will carefully examine all items before sending. Today, the majority of orders will be shipped within 48 hours. The expected delivery time will be between 3 and 7 days.
Returns
Stock is dynamic. It's not completely managed by us, since we have multiple entities, including the factory and the storage. The actual inventory can fluctuate at any time. It is possible that the stocks could be depleted after your order has been processed.
Our policy lasts 30 days. If you haven't received the product within 30 days, we're not able to issue a refund or an exchange.
To be eligible for a refund the product must be unopened and in the same state as when you received it. The item must be returned in its original packaging.
Related products
Network Testing
Network Testing
Network Testing
Network Testing
