Introducing the Ventis MX4 – a compact, multi-gas monitor available in both aspirated and diffusion versions. The Ventis meets your gas detection needs with ease. It is the ideal instrument for monitoring one to four gases in confined spaces and nearly any other potentially hazardous environment. This lightweight instrument is available with a bright “safety orange” overmold providing visibility in darker environments. An extended range lithium-ion battery pack provides up to 20 hours of continuous monitoring when using the diffusion version. Compatible with iNet and our DSX™ Docking Station.
Overview
Get the simple, reliable gas detection you need with the Ventis MX4, a four-gas monitor with the portability and size of a single-gas monitor. Designed to be extremely rugged yet lightweight and easy to wear, the Ventis MX4 eliminates the need for extra monitors and transitions seamlessly from personal monitoring to confined space entry thanks to the Ventis® Slide-on Pump. When your shift is over, maintenance, reporting, and data tracking are fast and easy with a DSXi Docking Station and iNet® Control software.
- Eliminate the need for two monitors by using Ventis MX4 for personal monitoring and confined space entry
- Choose your run time with 12-hour, 18-hour, or 20-hour batteries for non-pumped instruments
- Personalize devices for your needs by selecting alarm thresholds, setting latch alarms, disabling the ability to power off while the instrument is in alarm, and more
- Backed by a 4-year warranty for monitor and standard four-gas sensors
- Monitor up to four of the following gases: LEL (Methane), LEL (Pentane), CO, H2S, O2, CO/H2 Low, SO2, NO2
Specifications
| Specification | Detail Description |
|---|---|
| TYPICAL RANGE OF GASES DETECTED | |
| Combustible Gases | 0-100% LEL in 1% increments |
| Methane (CH4) | 0-5% of vol. in 0.01% increments |
| Oxygen (O2) | 0-30% of vol. in 0.1% increments |
| Carbon Monoxide (CO) | 0-1,000 ppm in 1 ppm increments |
| Hydrogen Sulfide (H2S) | 0-500 ppm in 0.1 ppm increments |
| Nitrogen Dioxide (NO2) | 0-150 ppm in 0.1 ppm increments |
| Sulfur Dioxide (SO2) | 0-150 ppm in 0.1 ppm increments |
| Case Material | Polycarbonate with Protective Rubber Overmold |
| Dimensions | 103 mm x 58 mm x 30 mm (4.1” x 2.3” x 1.2”) – Ventis, Lithium-ion Battery Version (typical) |
| 172 mm x 67 mm x 66 mm (6.8” x 2.6” x 2.6”) – Ventis with Pump, Lithium-ion Battery Version (typical) | |
| Weight | 182 g (6.4 oz) – Ventis, Lithium-ion Battery Version (typical) |
| 380 g (13.4 oz) – Ventis with Pump, Lithium-ion Battery Version (typical) | |
| Operating Temperature Range | -20°C- 50°C (-4°F-122°F) typical |
| Operating Humidity Range | 15%-95% Non-condensing (continuous) typical |
| Display/Readout | Backlit Liquid Crystal Display (LCD) |
| Power Source /Run Time | |
| Rechargeable Lithium-ion Battery Pack | (12 hours typical @ 20ºC) – Ventis |
| Rechargeable Extended-Range Lithium-ion Battery Pack | (20 hours typical @ 20ºC) – Ventis |
| (12 hours typical @ 20ºC) – Ventis with Pump | |
| Replaceable AAA Alkaline Battery Pack | (8 hours typical @ 20ºC) – Ventis |
| (4 hours typical @ 20ºC) – Ventis with Pump | |
| Alarms | Ultra-bright LEDs, loud audible alarm (95 dB at 30 cm) and vibrating alarm |
| Sensors | |
| Combustible gases/methane – Catalytic Diffusion, O2, CO, H2S, NO2, SO2 – Electrochemical | |
| CERTIFICATIONS | |
| UL | Class I, Division 1, Groups A B C D, T4; Zone 0, AEx ia IIC T4 Class II, Groups F G (Carbonaceous & Grain Dust); P66; IP67 |
| ATEX | Ex ia IIC T4 Ga and Ex ia I Ma; Equipment Group and Category II 1G and I M1; IP66; IP67 |
| IECEx | Ex ia IIC T4 Ga; IP66; IP67 |
| CSA | Class I, Division 1, Groups A B C D, T4; Ex d ia IIC T4 C22.2 No. 152 for %LEL reading only |
| ANZEx | Ex ia s Zone 0 I/IIC T4; IP66; IP67 |
| INMETRO | Ex d ia IIC T4 Gb; IP66; IP67 |
| KOSHA | Ex d ia IIC T4 |
| MSHA | 30 CFR Part 22; Permissible for Underground Mines; diffusion (without pump) li-ion versions only |
| China EX | Ex ia d IIC T4 Gb |
| China CMC | Metrology Approval |
| China MA | Approved for Underground Mines; diffusion (without pump) standard li-ion version only |
What’s in the Box
- Calibration Cup (without pump)
- Sample Tubing (with pump)
- Charger
- Reference Guide
Resources
Industrial Scientific Ventis Multi-Gas Detector Spec Sheet
Fast Shipping and Professional Packing
We offer a broad range of shipping options due to our long-running partnerships with UPS, FedEx and DHL. Our warehouse employees will pack all goods to our exacting requirements. Your items are carefully inspected and secured properly prior to shipping. We ship to thousands of customers every day from all over the world. This demonstrates our dedication to becoming the largest online retailer in the world. Warehouses and distribution centres can be located in Europe as well as the USA.
Note: Orders that contain more than one item will be assigned a processing date depending on the item.
We will carefully examine all items before sending. Today, the majority of orders will be shipped within 48 hours. The expected delivery time will be between 3 and 7 days.
Returns
Stock is dynamic. It's not completely managed by us, since we have multiple entities, including the factory and the storage. The actual inventory can fluctuate at any time. It is possible that the stocks could be depleted after your order has been processed.
Our policy lasts 30 days. If you haven't received the product within 30 days, we're not able to issue a refund or an exchange.
To be eligible for a refund the product must be unopened and in the same state as when you received it. The item must be returned in its original packaging.
Related products
Gas Monitors
INDUSTRIAL SCIENTIFIC T40 Rattler Single Gas Monitor – Carbon Monoxide CO Industrial Scientific
Gas Monitors
